1
7929 Lincoln Ave. Riverside, CA 92504
Phone: 951.689.ICON Fax: 951.689.1016
PART #
DESCRIPTION
67720CP
05-UP FSD 4WD 7” FRONT
2.5 VS PB CDCV PAIR
67720CP INSTALLATION INSTRUCTIONS
WARNING!
** READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH
BEFORE BEGINNING INSTALLATION! IF THESE INSTRUCTIONS ARE
NOT PROPERLY FOLLOWED SEVERE FRAME, SUSPENSION AND TIRE
DAMAGE MAY RESULT TO THE VEHICLE!
** ICON VEHICLE DYNAMICS RECOMMENDS THAT YOU EXERCISE
EXTREME CAUTION WHEN WORKING UNDER A VEHICLE THAT IS
SUPPORTED WITH JACK STANDS.
** ICON VEHICLE DYNAMICS RECOMMENDS ALL INSTALLTION TO
BE PERFORMED BY A PROFESSIONAL SHOP/SERVICE TECHNICIAN.
PRODUCT FAILURE CAUSED BY IMPROPER INSTALLATION WILL NOT BE
COVERED UNDER ICON’S WARRANTY POLICY.
1.
Using a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are
secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE. Remove the front wheels.
2
. Use a jack to support the axle and then remove the factory shock using a 17mm and 18mm socket/wrench.
3
. Install upper shock mount: Install stem hardware as seen in diagram. Install tall nut and fasten bushing assembly until 3-4 threads
are exposed for the jam nut. Install nut and torque to 50 ft-lbs while holding with a 19mm wrench. Do not overtighten bushing
assembly as this can lead to premature bushing wear. Failure caused by incorrect installation of bushings is not covered under ICON’s
warranty policy.
[SEE DIAGRAM]
COMPONENTS INCLUDED
(2) 164943C 05-UP FSD 7” FRONT 2.5 VS PB
CDCV
(2) 611006 9/16” HD STEM BUSHING KIT
HARDWARE INCLUDED
611006 HARDWARE KIT
(2) HEAVY DUTY 9/16 ID STEM BUSHING
(1) HEAVY DUTY 9/16 ID STEM WASHER
(1) HEAVY DUTY 12MM ID STEM WASHER
(1) M12-1.25 NUT
(1) M12-1.25 JAM NUT
TOOLS REQUIRED
JACK
JACK STANDS
TORQUE WRENCH
17MM SOCKET / WRENCH
18MM SOCKET / WRENCH
19MM SOCKET / WRENCH
21MM SOCKET / WRENCH
TECH NOTES
1. YOUR ICON SHOCK ASSEMBLIES COME FACTORY CHARGED TO 150 PSI. RELEASING NITROGEN
PRESSURE MAY LEAD TO SHOCK MALFUNCTION AND REDUCED RIDE QUALITY. FAILURE CAUSED BY
LOW NITROGEN PRESSURE IS NOT COVERED UNDER ICON’S WARRANTY POLICY.
8-28-2017 REV.A
INSTALLATION
