A.
Plug the Ethernet cable into the Ethernet port located on the bottom
of your clock.
B.
Connect the other end of the Ethernet cable into an available port on
your router, switch or wall port.
C.
Disconnect the power supply from the time clock and reconnect it
again to power cycle the time clock.
D.
Check to see that the green and amber Ethernet link lights turn on where
the Ethernet cable plugs into the clock. This verifies that your time clock is
connected to your network. If the lights do not turn on, check
the cable connections.
Tip:
Network connection is not required at all times. Network connection is
required for accessing the time clock application and running reports.
5
CONNECT VIA NETWORK
Connecting your time clock to the Network
