29
HOW TO ADJUST THE DRIVE BELT
If you feel the strap slip while you are rowing, even
when the resistance is adjusted to the highest level,
the drive belt may need to be adjusted. To adjust the
drive belt, first unplug the power adapter.
Next, see assembly step 11 on page 11. Remove the
Right and Left Neck Shields (77, 78).
Next, remove the Row Bar (19) from the Row Bar
Hook (88).
Then, remove the Upper Cover (85), the Front Cover
(79), the Lower Cover (80), and the Right Shield (75).
To locate the screws that attach each part, see
EXPLODED DRAWING B on page 35. Note: You will
need the help of a second person to tip the rower to
the side to access the lower Cover.
Next, locate the
Drive Belt (99)
on the right side
of the rower.
Loosen the two
M10 x 15mm
Screws (101).
Next, tighten the
M10 x 55mm Set
Screw (42) until
the Drive Belt
is tight. Then,
tighten the two
M10 x 15mm
Screws.
When the Drive Belt (99) is tight, reattach the parts that
you removed.
19
88
77, 78
75
79
80
85
42
99
101
Summary of Contents for NordicTrack RW600
Page 4: ...UTS 4...
