2
SETTING UP THE TRANSCEIVERS
2-17
NXDN Conventional mode operation
■
Making a call
L
Set the same settings (such as Tone settings) for each client transceivers as the settings in the RoIP Gateway.
L
This instructions assume as that the client transceiver settings have been completed.
[D-TRX1]
[D-TRX2]
Icom Transceiver
Example: IC-F1100DT
Icom Transceiver
Example: IC-F1100DT
Group ID
0006
Group ID
0007
[EXT1]
ID 0001
ID 0301
ID 0002
ID 0003
ID 0004
SWITCH
Repeater B
Transceiver A
IC-FR5000
(192.168.0.3)
Repeater C
IC-FR5000
(192.168.0.4)
Icom
Transceiver
(SU)
Icom
Transceiver
(SU)
Icom
Transceiver
(SU)
Icom trasnsceiver
IC-F5060
CH5
CH25
[LAN]
VE-PG4
(192.168.0.1)
IP Network
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
A1
A
B
C
A2
C2
C1
B2
B1
Making a call from Transceiver B1 to A1 and A2
(With the transceiver B1)
1. Select the destination ID of the A1 (A2)
(example: 0301).
2.
Push [PTT], and speak at your normal voice
level.
3.
Release [PTT] to receive.
(With the transceiver A1 or A2)
4. Push [PTT] to answer.
5.
Release [PTT] to receive.
Making a call from Transceiver C1 to B1
(With the transceiver C1)
1. Select the destination ID of the B1
(example: 0001).
L
If you want to call to the Group 0006, select 0006.
2.
Push [PTT] and speak at your normal voice
level.
3.
Release [PTT] to receive.
(With the transceiver B1)
4. Push [PTT] to answer.
5.
Release [PTT] to receive.
Making a call from Transceiver A1 to B1
Setting on the setting screen
1. Open the EXT I/O (EXT) screen. (Connection
Port Settings > EXT I/O (EXT))
2.
In [EXT I/O Port], select a port (example: EXT
I/O1 (EXT1)).
3. In [Bridge Communication], set Call Type to
“Individual,” Destination ID to “0001”, and Prefix
ID (if necessary), and then click <Apply>.
Operation
(With the Transceiver A1)
1.
Push [PTT], and speak at your normal voice
level.
2.
Release [PTT] to receive.
(With the Transceiver B1)
3. Push [PTT] to answer.
4.
Release [PTT] to receive.