6
FOR YOUR INFORMATION
6-4
■
Accessing the VE-PG4 with Telnet/SSH
Accessing with Telnet/SSH
Use Telnet according to your OS or Telnet/SSH client.
L
You can not access from the Telnet client because the “Telnet” setting of the RoIP Gateway is disabled by default.
Enable it to access from the Telnet client. (Management > Management Tools > Telnet/SSH)
L
The RoIP Gateway supports UTF-8 character codes. Use a terminal software that supports UTF-8.
How to login:
1. Enter the login name, and then push the [Enter] key to log in.
Login:
admin (Fixed)
Password: admin (Default)
Enter the administrator password set on the Administrator screen.
(Management > Administrator > Administrator Password)
2.
If Telnet/SSH is successfully connected to the RoIP Gateway, “VE-PG4>” is displayed.
Saving the setting:
After making changes, enter “save,” and then push the [Enter] key.
How to log out:
Enter the command “quit,” “exit,” or “logout” to log out from the RoIP Gateway.
■
About Telnet/SSH commands
Command list �������
Push the [Tab] key to display the Telnet command list. After typing a
Telnet command, push the [Tab] key to display the subcommand list.
Command help ������
Enter “ ?” after a command to display the command description.
(Example) “save ?” (“save” command description is displayed.)
Automatic complement ��
After typing the first few characters of the command, push the [Tab] key.
The rest of the characters for the command are automatically entered.
(Example) “n” + [Tab] → network
Suggested commands are displayed.
(Example) “res” + [Tab] → reset restart