2
SETTING UP THE TRANSCEIVERS
2-8
Connection Port Settings > EXT I/O (EXT)
Bridge Connection Settings > Bridge Connection
In the Unicast mode, you can call the designated radio, through a communication port.
This instruction is the example of the setting to communicate between the transceivers (A1 and B1) in the
simplex mode:
Icom
transceiver
(SU)
Icom
transceiver
(SU)
Icom Transceiver
IC-F5060
Icom transceiver
IC-F5060
[EXT1]
[EXT1]
VE-PG4
VE-PG4
IP
Network
Area A
Area B
192.168.0.2
192.168.0.1
A1
B1
■
Registering the transceiver to the RoIP Gateway
1
Open the EXT I/O (EXT) screen.
(Connection Port Settings > EXT I/O (EXT))
2
In [EXT I/O Port Mode], confi rm “Connected Unit” for EXT I/O1 (EXT1) is set to “Transceiver.”
Confirm
3
Confirm the EXT I/O Port is set to “EXT I/O 1 (EXT1),” Select “IC-F5060/F6060” in Transceiver Model,
and then click <Apply>.
q
Confirm
w
Select
e
Click
L
When connecting another transceiver model, select appropriate model name.
Unicast mode operation
(
☞
Continued on the next page)
