6
CONVERTER MODE SETTING SCREEN
6-102
9. [Port Settings] Menu (continued)
M
Bridge Control
Configure the details for bridge-connected device.
q
Priority Receive …………
Select “Enable” to keep receiving, even if the transceiver detects audio from
the SIP phone.
(Default: Enable)
w
PTT Cancel ………………
Select “Enable” to abort the calling to an IP phone when a transmit request is
detected.
(Default: Disable)
Notice Tone to the Transceiver
e
Reception Notice …………
Select “Tone 1” to “Tone 3” to notify that the call from an IP phone is received.
(Default: Not used)
r
Calling Notice Tone ………
Select ”Tone 1” to ”Tone 3” to notify the calling to an IP phone.
(Default: Notice Tone 2)
t
Send Connect Success Tone
Select “Tone 1” to “Tone 3” to notify that the IP phone’s handset is taken off.
(Default: Notice Tone 2)
[Port Settings]–[Bridge 1–Bridge 4]