6
CONVERTER MODE SETTING SCREEN
6-60
9. [Port Settings] Menu
M
Transceiver Model
Select the radio to be connected to [TRX1]/[TRX2].
• The following explanation is an example of selecting “General Setting.”
Transceiver Model …………
Select the radio to be connected to the [TRX1]/[TRX2] port.
(Default: IC-F5060/F6060)
• If your radio needs detailed setting, select “General Setting.”
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
M
Transceiver Connection
"General Setting"
The setting screen when "General Setting" is selected in [Transceiver Model].
q
TX Volume Offset to Transceiver
……………………………
Adjust the VE-PG3’s transmitting audio level that is sent to the connected
transceiver between “15” and “–30” (dB).
(Default: –22)
w
RX Volume Offset from Transceiver
……………………………
Adjust the VE-PG3’s audio level from the transceiver between “+26” to “–26” (dB).
(Default: –24)
e
PTT Type …………………
Select the PTT circuit type.
(Default: Single PTT)
• Single PTT: The speaker line and PTT input line are separated.
• Superimposed PTT: The PTT input line is superimposed on the MIC input
(A1 terminal).
r
PTT Logic …………………
Select the PTT logic.
(Default: Low)
• High:
PTT line becomes “High” when [PTT] is pushed. (Active High)
• Low:
PTT line becomes “Low” when [PTT] is pushed. (Active Low)
* Appears only when “Enable” is selected in [Power Detection].
** Appears only when “Enable” is selected in [Serial Communication].
*
**