5
BRIDGE MODE SETTING SCREEN
5-14
4. [Network] Menu
M
DHCP Server (continued)
u
Default Gateway …………
Enter the default gateway IP address.
i
DNS Proxy ………………
Select “Enable” to use the DNS Proxy function.
(Default: Enable)
When “Enable” is selected, you don’t need to change the DHCP clients’ set-
ting even when the DNS server address has changed.
o
Primary WINS Server ……
Enter the WINS server’s primary address.
!0
Secondary WINS Server …
Enter the WINS server’s secondary address.
!1
TFTP ………………………
(Not used in the Bridge mode.)
!2
TFTP Server ………………
(Not used in the Bridge mode.)
[Network]–[DHCP Server]
M
Static DHCP
Enter the MAC and IP addresses, and then click <Add>.
You can enter up to 32 entries.
Note: Make sure that the addresses of the devices on the network don’t overlap or conflict. If a DHCP server is
already connected to the network, and there is an address conflict, a network problem will occur. See the Trouble-
shooting section for possible solutions.
M
Static DHCP Table
Displays the static DHCP entries.