Icom RS-AP3 Instruction Manual Download Page 93

Page: 93 / 119

COMMON CONFIGURATION

5-5

3. Network Settings (Continued)

Web Authentication (Advanced)

The “Import/Export/Delete All” option can only be used when the RS-AP3 is used with Icom’s access points.
You can import, export or delete all the entries on the local list on each virtual access point (interface.)

Exporting

Exports the programmed local list as a text file (extension: txt.)

1. Select “Export.”

• When no local list is programmed, “No items to export in the Local List.” is displayed.
2. Set a desired file name, and then click [Save].

• The exported file can be edited with a text editor.

Importing

Imports exported files.

   1. Select “Import.”
   2. Select a file for the local list, and then click [Open].
   3. Click [OK].

• The existing local list is overwritten.

• You can import only the file that is exported from [Export].

Deleting all local lists

1. Select “Delete All.”

2. Click [Yes] to delete all the local list that are registered in the selected virtual access point.

Summary of Contents for RS-AP3
























































































































Search results

Summary of Contents for RS-AP3

Reviews:

Related manuals for RS-AP3

Brands by name

Popular brands

Icom RS-AP3, Instruction Manual

Search results

Summary of Contents for RS-AP3

Reviews:

Related manuals for RS-AP3

Brands by name

Popular brands