Icom RS-AP3 Instruction Manual Download Page 10

Page: 10 / 119

USING THE RS-AP3

1-5

3. Starting the RS-AP3

1. Starting the RS-AP3

NOTE:

• After the installation has completed, the RS-AP3 USB flash drive must also be inserted into the PC

when you first run the RS-AP3 software.

• After running the software for the first time, the flash drive does not have to be inserted.
When a USB flash drive needs to be inserted, such as in the following operation, insert the same flash

drive that you used when you first ran the software.

➥

Saving or opening a setting file.

➥

Synchronizing using the mirroring function. (

p.6-10)

Click the RS-AP3 icon in the Start menu.
You can also start the software by simply double-clicking the RS-AP3 icon on your desktop.

• These Instructions are based on using Microsoft

Windows

If the “User Account Control” window appears, click [Yes] to continue.

Click

Summary of Contents for RS-AP3
























































































































Search results

Summary of Contents for RS-AP3

Reviews:

Related manuals for RS-AP3

Brands by name

Popular brands

Icom RS-AP3, Instruction Manual

Search results

Summary of Contents for RS-AP3

Reviews:

Related manuals for RS-AP3

Brands by name

Popular brands