![background image](http://html1.mh-extra.com/html/icom/im323/im323_instruction-manual_2038201015.webp)
5
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
!3
KEY ICON
(p. 6)
Shows the programmed function of the softkeys on the
front panel.
!4
TIME ZONE INDICATOR
Shows the current time when a GPS data is received,
➥
GPS receiver is connected, or the time is manually pro-
grammed.
•WhentheGPScurrenttimeisinvalid,“??”willblinkevery2
seconds instead of current time. After 23.5 hours has passed,
“NO TIME” will appear.
•“??”willblinkevery2secondsinsteadofthecurrenttime,
after 4 hours have passed from the time when the time was
manually programmed. The manually programmed time is
held for only 23.5 hours, and after that, “NO TIME” will ap-
pear.
“LOCAL” appears when the offset time is set.
➥
“MNL” appears when the time is manually programmed.
➥
“UTC” appears when the GGA, GLL and GNS GPS
➥
sentence format is included in the GPS signal.
The date information appears when the RMC GPS
➥
sentence format is included in the GPS signal.
“NO TIME” appears when no GPS receiver is connect-
➥
ed, and no time is manually input.
NOTEfortheIC-M323andIC-M324:
These models do not come with the internal GPS.
Therefore the GPS receiver needs to be connected, or
the time manually needs to be programmed for the time
zone indicator to be displayed.
!5
POSITION INDICATOR
Shows the current position when a GPS receiver is
➥
connected, or the position is manually programmed.
•WhentheGPSpositionisinvalid,“??”mayblinkevery2sec
-
onds instead of position. The last position is held for only
23.5 hours, and after that, “NO POSITION” will appear.
•“??” will blink every 2 seconds instead of position, after 4
hours have passed from the time when the position is manu-
ally programmed. The manually programmed position is held
for only 23.5 hours, and after that, “NO POSITION” will ap-
pear.
“NO POSITION” appears when no GPS receiver is
➥
connected, and no position is manually input.
!6
SCAN INDICATOR
“SCAN 16” appears during a Priority scan; “SCAN” ap-
➥
pears during a Normal scan. (p. 17)
“DUAL 16” appears during Dualwatch; “TRI 16” appears
➥
during Tri-watch. (p. 18)
!8
LOCAL ICON
(p. 11)
Appears when the Attenuator function is turned ON.
*Only U.S.A. and Australian version transceivers.