![background image](http://html1.mh-extra.com/html/icom/im323/im323_instruction-manual_2038201014.webp)
4
2
PANEL DESCRIPTION
Function display
■
!4
!6
!5
q
w
i
e
t
r
!0
y
o
u
!1
!2
!3
q
BUSY/TRANSMIT ICON
(p. 11)
“
➥
” appears when receiving a signal or when the
squelch is open.
“
➥
” appears while transmitting.
w
POWER ICON
(p. 11)
“25W” appears when high power is selected.
➥
“1W” appears when low power is selected.
➥
e
CHANNEL GROUP ICON
(p. 10)
Shows which channel group is selected, an International
“INT,” U.S.A. “USA,” ATIS “ATIS” or DSC “DSC”, depending
on the version.
“WX” appears when the weather channel is selected.*
➥
*Only U.S.A. and Australian version transceivers.
r
CALL CHANNEL ICON
(p. 9)
Appears when the Call channel is selected.
t
DUPLEX ICON
(p. 10)
Appears when a duplex channel is selected.
y
FAVORITE CHANNEL ICON
(p. 17)
Appears when a Favorite (Tag) channel is selected.
u
MESSAGE ICON
(p. 58)
Blinks when there is an unread DSC message.
i
GPS ICON
Stays ON when the connected GPS receiver is acti-
➥
vated and valid position data is received.
Blinks when searching valid position data.
➥
o
SWITCH ICON
(p. 61)
Appears when the “CH 16 SWITCH” in DSC Settings is set
to ‘OFF.’
!0
LOW BATTERY ICON
Blinks when the battery voltage drops to approximately
10 V DC or less.
!1
CHANNEL NUMBER READOUT
Shows the selected operating channel number.
•Whenasimplexchannelisselected,“A”appears.
!2
CHANNEL NAME FIELD
The channel name appears, if programmed. (p. 12)