Icom IM323, Instruction Manual

Page: 48 / 100

38
7
DSC OPERATION
Push [CALL] to transmit the Position Report Call.
r
฀ •฀฀If฀Channel฀70฀is฀busy,฀the฀transceiver฀stands฀by฀until฀the฀channel฀
becomes clear.
After the Position Report Call has been transmitted, the
t
transceiver automatically returns to the normal operating
mode.
When no GPS receiver is connected, and both position and
time have been manually programmed, the screen shown
below appears. Edit your latitude and longitude position and
UTC time as follows:
Push [CHG], then edit your latitude and longitude position
➥
and UTC time.
฀ •฀Select฀a฀desired฀number฀using฀Dial,฀or฀[
Y
]/[
Z
]/[
Ω
]/[
≈
].
฀ •฀Push฀[ENT]฀or฀Dial฀to฀set฀it.
฀ •฀฀To฀move฀the฀cursor,฀select฀either฀arrow,฀“
←
” or “
→
,” then push
[ENT] or Dial.
฀ •฀฀Select฀N฀(North฀latitude)฀or฀S฀(South฀latitude)฀when฀the฀cursor฀
is on the ‘N’ or ‘S’ position.
฀ •฀฀Select฀W฀(West฀longitude)฀or฀E฀(East฀longitude)฀when฀the฀cur -
sor is on the ‘W’ or ‘E’ position.