Icom IM323, Instruction Manual

Page: 23 / 100

13
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Call channel programming
■
You can program the Call channel with your most often-used
channel in each channel group for quick recall.
Select the desired channel group (INT, USA, ATIS or DSC)
q
to be programmed. (p. 10)
Hold down [16/C] for 1 second to select the Call channel of
w
the selected channel group.
฀ •฀“CALL”฀and฀the฀Call฀channel฀number฀appear.
Hold down [16/C] again for 3 seconds (until a long beep
e
changes to 2 short beeps) to enter the Call channel pro-
gramming mode.
Rotate Dial or push [
r
∫
](CH)/[
√
](CH) to select a channel.
Push [ENT] to program the displayed channel as the Call
t
channel.
฀ •฀Push฀[CLEAR]฀to฀cancel.
Channel name programming
■
Each channel can be assigned a unique alphanumeric ID of
up to 10 characters.
Capital letters, 0 to 9, some symbols (! " # $ % & ' ( ) * + ,
– .
/฀[฀\฀]฀^฀_฀:฀;฀<฀=฀>฀?)฀and฀a฀space฀can฀be฀input.
Push [
q
∫
](CH)/[
√
](CH) to select a channel.
฀ •฀฀First,฀cancel฀the฀Dualwatch,฀Tri-watch฀or฀Scan฀function,฀if฀acti -
vated.
Push [NAME] to open the channel name programming
w
screen.
฀ •฀A฀cursor฀is฀displayed฀on฀the฀irst฀character.
Enter the desired channel name in the following manner:
e
฀ •฀Select฀a฀desired฀character฀using฀Dial,฀or฀[
∫
]/[
√
]/[
Ω
]/[
≈
].
฀ •฀Push฀[ENT]฀or฀Dial฀to฀set฀it.
฀ •฀฀To฀move฀the฀cursor,฀select฀either฀arrow,฀“
← ” or “ → ,” then push
[ENT] or Dial.
฀ •฀Push฀[123],฀[!$?]฀or฀[ABC]฀to฀select฀a฀character฀group.
฀ •฀Select฀“SPACE,”฀then฀push฀[ENT]฀to฀input฀a฀space.
฀ •฀Select฀“DELETE,”฀then฀push฀[ENT]฀to฀delete฀a฀character.
฀ •฀Push฀[CLEAR]฀to฀cancel฀and฀return฀to฀the฀previous฀screen.