Icom id- rp2, Service Manual, Page: 29 / 150

¤
GENERAL
• Frequency range : Receive USA 10.000–10.025 GHz
USA-1 10.150–10.175 GHz
Transmit USA 10.150–10.175 GHz
USA-1 10.000–10.025 GHz
• Type of emission : F1D* (GMSK)
*F7W for system operation (with ID-RP2C)
• Frequency stability :
±
5 ppm (based on 25˚C; +77˚F)
• Frequency resolution : 250 kHz
• Antenna connector : Type-N (50
Ω)
• Communication speed : 10 Mbps
• Power supply requirement : 13.8 V DC
±
15% (Negative ground)
• Current drain : Transmit Less than 2.3 A
Stand-by Less than 0.7 A
• Usable temperature range : –30˚C to +60˚C; –22˚F to +140˚F
• Dimensions (proj. not included) : 328(W)×262(H)×116(D) mm; 12
29
⁄
32
(W)×10
5
⁄
16
(H)×4
9
⁄
16
(D) in.
• Weight (Approx.; incl. cables) : 14.6 kg; 32 lb 3 oz
¤
TRANSMITTER
• Output power (at 13.8 V DC) : 2.0 W
• Modulation system : Quadrature (525.75 MHz)
• Occupied bandwidth : Less than 10.5 MHz
• Spurious emissions : Less than 100 µW
¤
RECEIVER
• Receive system : Double-conversion superheterodyne system
• Intermediate frequencies : 1st 1747.5 MHz
2nd 374 MHz
• Sensitivity (BER 1×10
–2
) : Less than –78 dBm
• Selectivity : More than 1 MHz/6 dB
Less than 1.5 MHz/40 dB
• Receive spurious : Less than –57 dBm
All stated specifi cations are subject to change without notice or obligation.
C - 1 - 1
SECTION 1 SPECIFICATIONS