![background image](http://html2.mh-extra.com/html/icom/id-5100a/id-5100a_basic-manual_4733637024.webp)
New2001
New2001
11
New2001
BASIC OPERATION
2
■
Power ON the power
Hold down [
➥
] for 1 second to turn ON the power.
• A beep sounds and, after the opening message and power source
voltage are displayed, the operating frequency appears.
• Hold down [ ] for 1 second to turn OFF the power.
■
Setting audio volume and
squelch level
Rotate [VOL] to adjust the audio level.
q
Rotate [SQL] until the noise and the “BUSY” icon just dis-
w
appear.
• Rotating [SQL] clockwise makes the squelch tight. The tight
squelch is for strong signals.
• When rotating [SQL] clockwise beyond the center position,
[SQL] can be used as ‘S-meter Squelch’ or ‘Attenuator.’ Select
the [SQL] option in the Menu screen. (p. 71)
■
Selecting a tuning step
Rotating [DIAL] changes the frequency in the selected tuning
steps.
The VFO scan uses this step to search for a signal.
Tuning steps (kHz)
5
6.25
8.33*
10
12.5
15
20
25
30
50
Auto*
*Appears only when the AIR band is selected.
D
Tuning step selection
Touch the kHz digits for 1 second.
q
• Opens the Tuning step setting window.
Touch the desired tuning step.
w
• Sets the tuning step, and then returns to the previous screen.
• You can set the tuning step for both the VFO and Memory
mode.
• You can set the tuning step for each band.
• In the Tuning step setting window, rotating [DIAL] also selects
the tuning step.
[VOL]
[VOL]
[SQL]
[SQL]
[ ]
To mute the audio, touch [QUICK] for 1 second.
➥
• Releases mute when rotating [DIAL], [VOL] or [SQL], or oper-
ating a key, touch screen or microphone.
Summary of Contents for ID-5100A
Page 104: ...MEMO...
Page 105: ...MEMO 6 7 8 9 10 11 12 13 14 15 16...
Page 106: ...MEMO...
Page 107: ...MEMO 6 7 8 9 10 11 12 13 14 15 16...