![background image](http://html2.mh-extra.com/html/icom/ic-v82/ic-v82_instruction-manual_4733617070.webp)
58
11
DIGITAL MODE OPERATION
D
D
GPS Automatic transmission
q
While connected to a GPS receiver, push
[A•
FUNC
]
and
[0•
OPT
]
to enter
OPTION SET MODE
.
w
Push
[
Y
Y
]
or
[
Z
Z
]
several times to select the GPS automatic
transmission.
• “GtX” appears.
e
Rotate
[VOL]
to set the interval time for the GPS auto-
matic transmission.
• Interval time is selectable from 0.5 (30 sec.), 1, 3, 5, 10, 30 min.
r
Push
[
Y
Y
]
three times to select the transmit message se-
lection, if desired.
• GPS Tx message is selectable from OFF and C1 to C6.
• Tx message must be programmed in advance. (see page 56 for
setting)
t
Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to exit
OPTION SET MODE
.
IMPORTANT:
GPS Automatic transmission transmits at
every setting interval even while receiving an another sta-
tions communication. To prevent interference to other sta-
tions, set the the Repeater lockout item “RLO” (set to “bU”
busy lockout) in
INITIAL SET MODE
. (p. 64)
D
D
Receiving a GPS transmission
q
Push
[A•
FUNC
]
and
[0•
OPT
]
to enter
OPTION SET MODE
.
w
Push
[
Y
Y
]
or
[
Z
Z
]
several times to select the received posi-
tion.
• “RXP.OS” appears.
e
Push and hold
[0•
OPT
]
for 1 sec. to enter the position indi-
cation.
• Latitude data and longitude date appear by every pushing
[
Y
Y
]
or
[
Z
Z
]
.
r
Push
[0•
OPT
]
to return
OPTION SET MODE
, then push
[
Y
Y
]
twice to select the received GPS message.
t
Push and hold
[0•
OPT
]
for 1 sec. to enter the message.
• Received message is indicated, push
[
Z
Z
]
or
[
Y
Y
]
to move the
cursor to left or right, respectively.
y
After checking a received position or message, push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to return to normal operating mode.