56
11
DIGITAL MODE OPERATION
D
D
Tx message programming
At least one of the Tx message channels must be pro-
grammed, if you want to use the GPS message. The GPS
message is transmitted from Tx message channels.
q
While in
OPTION SET MODE
, push
[
Y
Y
]
or
[
Z
Z
]
several times
to select “tXm,” then push and hold
[0•
OPT
]
for 1 sec. to
edit the message indication, and then rotate
[VOL]
to se-
lect the message channel.
• One of either “C1” to “C6” blinks.
w
Push
[
Y
Y
]
to select message programming mode.
• The 1st digit blinks and channel indication stops blinking.
e
Rotate
[VOL]
to set the desired character.
r
Push
[
Y
Y
]
to select 2nd digit, then rotate
[VOL]
to select
the desired character.
• 2nd digit blinks (1st digit stop blinking).
• Repeat this step for programming.
t
Push
[0•
OPT
]
to save the message.
y
Repeat steps
w
to
t
to set another message channels.
u
Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to exit
OPTION SET MODE
.
• Available characters
D
D
Rx message indication
When an individual station call with message is received, the
message can be stored into the Rx message record, up to 6
records and each record can indicate a message of up to 20
characters. The oldest record is overwritten when another
message is received.
q
While in
OPTION SET MODE
, push
[
Y
Y
]
or
[
Z
Z
]
several times
until “RXm” appears.
w
Push and hold
[0•
OPT
]
for 1 sec. to edit the message indi-
cation, and then rotate
[VOL]
to select the message
recored.
• One of either “C1” to “C6” blinks.
e
Push
[
Y
Y
]
(or
[
Z
Z
]
) to scroll the message.
• Push
[
Z
Z
]
or
[
Y
Y
]
to move the cursor to left or right, respectively.
r
Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to exit
OPTION SET MODE
.
(3)
(D)
(N)
(X)
(+)
(4)
(E)
(O)
(Y)
(–)
(”)
(5)
(F)
(P)
(Z)
(
✱
)
(6)
(G)
(Q)
(/)
(7)
(H)
(R)
(,)
(8)
(I)
(S)
(space)
(9)
(T)
(0)
(A)
(U)
(1)
(B)
(V)
(2)
(C)
(J)
(K)
(L)
(M)
(W)
(.)
( ))
(( )
(’)
(&)
(%)
($)
(#)
(!)
(<)
(:)
(;)
(=)
(>)
(?)
(@)
([)
(\)
(])
(^)
