![background image](http://html2.mh-extra.com/html/icom/ic-v82/ic-v82_instruction-manual_4733617076.webp)
64
12
OTHER FUNCTIONS
D
D
Auto repeater
The auto repeater function automatically turns ON or OFF the
duplex operation and tone encoder. The offset and repeater
tone is not changed by the auto repeater function. Reset
these frequencies, if necessary.
• RPt.OF : The auto repeater function is turned OFF.
• RPt.R1 : Activates for duplex only. (default)
• RPt.R2 : Activates for duplex and tone.
D
D
Auto power-off
The transceiver can be set to automatically turn OFF after a
speci
fi
ed period with a beep when no key operations are per-
formed.
• 30 min., 1 hour, 2 hours and OFF (default) can be speci
fi
ed.
The speci
fi
ed period is retained even when the transceiver
is turned OFF by the auto power-off function. To cancel the
function, select “POF.OF” in this
SET MODE
.
NOTE:
While an optional UT-118
DIGITAL UNIT
is installed
and GPS automatic transmit function is activated, this
function does not work.
D
D
Repeater lock-out
Selects lockout type from repeater, busy and OFF.
• RLO.OF : No lockout is activated. (default)
• RLO.RP : The repeater lockout is turned ON.
• RLO.bU : The busy lockout is turned ON.
D
D
Squelch delay
Selects squelch delay from short and long to prevent re-
peated opening and closing of the squelch during reception
of the same signal.
• Sqt. S : The squelch closes in short delay. (default)
• Sqt. L : The squelch closes in long delay.
USA/CSA versions only