![background image](http://html1.mh-extra.com/html/icom/ic-m92d/ic-m92d_instruction-manual_2038055038.webp)
31
1
CHAPTER_CONTINUED
Transmitting a Group call
D
The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter “GROUP CALL” in the DSC CALLS menu.
q
Select the desired preprogrammed group address or
w
“Manual Input,” using [
Y
]/[
Z
], then push [ENT].
• The ID code for the Group call can be set first. (p. 20)
• When “Manual Input” is selected, set the 8 digit ID code for the
group you wish to call.
Select a desired intership channel using [
e
Y
](CH)/[
Z
](CH),
then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
About Manual Inputting:
Enter a desired group ID in the following way:
• Select a desired number using [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT].
• The first digit is specified as ‘0’ for a Group ID.
• The first two digits are ‘0’ for any Coast station ID.
A confirmation screen appears.
r
• Confirm the call contents.
MENU
➪
DSC Calls
➪
Group Call
(Push [MENU]) (Push [
Y
]/[
Z
], then push [ENT].)
Summary of Contents for IC-M92D
Page 78: ...MEMO ...
Page 79: ...MEMO ...