![background image](http://html1.mh-extra.com/html/icom/ic-m92d/ic-m92d_instruction-manual_2038055030.webp)
23
8
DSC OPERATION
A Distress call should include the ship’s position and time
data. If no GPS is connected, your position and UTC (Univer-
sal Time Coordinated) time should be manually input. They
are automatically included when a GPS receiver compatible
with the NMEA0183 ver. 2.0 or 3.01 format is connected.
• Manual programming is disabled when a GPS receiver is
connected.
• Manually programmed position and time data will be held
for only 23.5 hours.
Enter “POSITION INPUT” in the DSC SETTINGS menu.
q
Edit your latitude and longitude position data using Dial, or
w
[
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Select a desired number using Dial, or [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT].
• Select N: North latitude or S: South latitude when the cursor is
on the ‘N’ or ‘S’ position.
• Select W: West longitude or E: East longitude when the cursor
is on the ‘W’ or ‘E’ position.
After entering the position data, push [ENT] to program it.
e
The UTC time programming screen is displayed, enter the
r
UTC time in the following way:
• Select a desired number using [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT].
Push [ENT] to program your position and time data.
t
• Return to the “DSC SETTING” screen.
Position and time programming
■
MENU
➪
DSC Settings
➪
Position Input
(Push [MENU]) (Push [
Y
]/[
Z
], then push [ENT].)
Summary of Contents for IC-M92D
Page 78: ...MEMO ...
Page 79: ...MEMO ...