![background image](http://html1.mh-extra.com/html/icom/ic-m92d/ic-m92d_instruction-manual_2038055028.webp)
21
8
DSC OPERATION
Programming Group ID
D
Enter “GROUP ID” in the DSC SETTINGS menu.
q
• When no group ID is programmed, “No ID” is displayed. In this
case, push [MENU] to exit the MENU screen.
Push [ADD].
w
• The “GROUP ID” program screen is displayed.
Enter a desired group ID in the following instruction:
e
• Select a desired number using [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT].
The first digit is fixed as ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
Repeat step
r
e
to input the specific 9 digits group code.
After entering the 9 digit code, push [ENT] to set it.
t
• Group ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following instruction:
y
• Select a desired character using [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT].
• Push [123], [!$?] or [ABC] to select a character group.
After entering the ID name, select “FINISH” pushing [
u
Y
]/
[
Z
]/[
Ω
]/[
≈
], then push [ENT] to program it.
• The “GROUP ID” list screen is displayed.
Push [MENU] to exit the MENU screen.
i
MENU
➪
DSC Settings
➪
Group ID
(Push [MENU]) (Push [
Y
]/[
Z
], then push [ENT].)
Summary of Contents for IC-M92D
Page 78: ...MEMO ...
Page 79: ...MEMO ...