Icom IC-M92D, Instruction Manual

Page: 22 / 80

15
5
BASIC OPERATION
Setting TAG channels
■
For more efficient scanning, add the desired channels as
TAG channels or clear TAG for unwanted channels. Chan-
nels that are not tagged will be skipped during scanning. TAG
channels can be assigned to each channel group (U.S.A.,
International and Canada) independently.
Select
q
“ CH/WX ” to select the desired channel group.
While the desired channel is selected on the display, se-
w
lect the TAG icon on the soft keys.
•
“
” appears on the display.
To cancel a TAG channel setting, select the desired TAG
e
channel, then select the TAG icon on the soft keys.
•
“
” disappears.
To Clear (or set) all tagged channels:
Hold down to select TAG for 3 seconds on the soft keys until a short
beep sounds. This clears all tags or tag all channels.
Channel names
■
Each channel can be labeled with alphanumeric names of up
to 10 characters for easy channel recognition.
The programmed names will be indicated at the chan-
➥
nel name indicator of the function display.
Capital letters, numbers, 26 types of symbols and
➥
space can be used.
Select the desired channel.
q
• Cancel dualwatch, Tri-watch or Scan in advance.
While the desired channel is displayed, select
w
“NAME” to
enter the channel name edtting mode screen.
Select the desired character by pushing
e
[ Y ]/[ Z ]/[ Ω ]/[ ≈ ]
keys, and then input with [ENTER] .
• While in the channel name editting mode, push the very right
key of the soft keys to change between alphabets, numers and
symbols.
• Select “DELETE” to delete the selected character and select
“SPACE” to insert a space.
r
Select “FINISH” to program the name.
• Automatically returns to the main mode.
• The programmed name appears on the dsiplay.