![background image](http://html1.mh-extra.com/html/icom/ic-m92d/ic-m92d_instruction-manual_2038055019.webp)
12
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Call channel programming
■
Call channel is used to access the Call Channel 9 (default),
however, you can program the call channel with your most
often-used channels in each channel group for quick recall.
Select the
q
desired channel group (U.S.A, International or
Canada) to be programmed. (p. )
Hold down
w
[16/C]
for 1 second to select the call channel of
the selected channel group.
• “
CALLING
” and call channel number appear.
Hold down
e
[16/C]
again until long beep stops with two
short beeps. The channel programming mode screen is
displayed.
r
Push
[
Y
]
/
[
Z
]
to select the desired channel.
t
Push [
ENTER
] to program the selected channel as the call
channel.
• The display automatically returns to the main menu screen.
Adjusting the volume level
■
The volume level can be adjusted with
[VOL/SQL]
and
[
Y
]
/
[
Z
]
keys.
Push
q
[VOL/SQL]
once to enter the volume adjustment
mode, then adjust the volume level with
[
Y
]
/
[
Z
]
.
•
The transceiver has 20 volume levels and OFF.
• With no key operation is performed for 5 seconds, it returns to
the main menu.
Push
w
[VOL/SQL]
twice to exit the volume adjustment
mode.
Adjusting the squelch level
■
The squelch level can be adjusted with
[VOL/SQL]
and
[
Y
]
/
[
Z
]
keys.
In order to receive signals properly, as well as for the scan
to function effectively, the squelch must be adjusted to its
proper level.
Push
q
[VOL/SQL]
twice to enter the squelch adjustment
mode, then adjust the squelch level with
[
Y
]
/
[
Z
]
.
• The transceiver has 11 squelch levels: OP is completely open;
10 is tight squelch; 1 is loose squelch.
• With no key operation is performed for 5 seconds, the trans-
ceiver returns to the main screen.
Push
w
[VOL/SQL]
again to exit the adjustment mode and
return to the main menu screen.
Summary of Contents for IC-M92D
Page 78: ...MEMO ...
Page 79: ...MEMO ...