![background image](http://html1.mh-extra.com/html/icom/ic-m803/ic-m803_instruction-manual_2038025080.webp)
72
9
CONNECTIONS AND INSTALLATION
■
Antenna
Most stations operate with a whip or long wire
antenna� However, these antennas cannot be
connected directly to the transceiver since their
impedance may not be matched with the transceiver
antenna connector�
R
DANGER HIGH RF VOLTAGE! NEVER
touch
an antenna while transmitting� It may result in an
electrical shock or burn�
en it a matc e antenna all marine an s
may not be entirely usable� The following antenna
matcher and antenna tuner may be helpful for proper
antenna installation�
D
MN-100/MN-100L
D
AT-130/AT-120/AH-3
Backstay
Antenna
MN-100/MN-100L
When the antenna is
used for DSC reception�
Control cable (user supplied)
Assemble the connector using
the supplied connector kit� (p� 68)
See page 78 for pin assignment�
To the antenna element
[E]:
[13�6]:
[START]:
[KEY]:
[E]:
[13�6]:
[START]:
[KEY]:
For AT-120/AH-3:
D
Non-Icom Tuner
Some non-Icom tuners may be used with the IC-M803�
Ask your dealer if you wish to connect one�
D
AT-140
See page 70�
Summary of Contents for IC-M803
Page 91: ...83 252 9 29 32 95 4 3 3 4 R8 5 16 Maximum 274 10 25 32 114 4 1 2 Unit mm inch Cut here...
Page 92: ......
Page 95: ...MEMO...