![background image](http://html1.mh-extra.com/html/icom/ic-m803/ic-m803_instruction-manual_2038025066.webp)
58
7
DSC OPERATION
■
DSC Settings
D
CH Auto Switch
regulation a ter recei ing a SC call t e transcei er
automaticall s itc es t e operating c annel to t e
ispla e re uenc o e er en ou set t is
function to “OFF”, the transceiver remains on the
operating channel, even after receiving a DSC call�
1� Open
C uto S itc
[MENU] > DSC Settings >
CH Auto Switch
2� Select an option�
•
ccept a ter sec
After receiving a DSC call, the transceiver
remains on the current operating channel for 10
seconds� After that, the transceiver automatically
s itc es to t e ispla e re uenc
•
gnore a ter sec
After receiving a DSC call, if you do not push
in 10 seconds, the transceiver
ignores the call, and then remains on the
current operating channel�
•
anual
After receiving a DSC call, you can select
et er or not to accept t e recei e SC call
3� Push [MENU], or
to return to the Main
screen�
D
NMEA Data Output
en recei ing a SC call rom t e station t at is
selected in this setting, the transceiver outputs the
DSC data to the NMEA output port�
L
You can send Distress calls despite this setting�
1� Open “NMEA Data Output�”
[MENU] > DSC Settings >
NMEA Data Output
2� Select an option�
•
ll stations
From any station�
•
Station ist rom t e stations t at are entere
in Individual ID or Group ID on the
Menu screen�
•
oes not output an SC ata
from the NMEA 0183 Output port�
D
Alarm Status
Sets t e alarm
or
en recei ing eac t pe
of DSC call�
Safety/Routine
Select et er or not to soun an alarm en
receiving the Safety or Routine DSC call�
1� Open “Alarm Status�”
[MENU] > DSC Settings >
Alarm Status
2� Select “Safety” or “Routine�”
3� Select an option�
•
n larm soun s
•
larm oes not soun
4� Push [MENU], or
to return to the Main
screen�
Warning
Select et er or not to soun an alarm or en
• No MMSI is entered�
• The received position data has not been updated
for 10 minutes�
• The position data has not been manually updated
for 4 hours�
• The received, or manually entered position data
has not been updated for 23�5 hours�
1� Open “Alarm Status�”
[MENU] > DSC Settings >
Alarm Status
2�
Select arning
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
Summary of Contents for IC-M803
Page 91: ...83 252 9 29 32 95 4 3 3 4 R8 5 16 Maximum 274 10 25 32 114 4 1 2 Unit mm inch Cut here...
Page 92: ......
Page 95: ...MEMO...