![background image](http://html1.mh-extra.com/html/icom/ic-m803/ic-m803_instruction-manual_2038025010.webp)
2
2
PANEL DESCRIPTION
1
SPEAKER J ACK [EXT-SP] (p. 69)
Connects to the optional SP-24 or an external
speaker�
NOTE:
When an external speaker is connected,
the internal speaker is automatically muted�
2
CONTROLLER CONNECTOR [CONTROLLER]
(p. 69)
Connects to the supplied remote controller�
3
ACCESSORY CONNECTOR [ACC] (pp. 14, 78)
Connects to a CW keyer or an FSK terminal unit�
4
MAINTENANCE PORT [MAINTENANCE]
Connects to a USB cable for programming the
transceiver�
L
This connector is only used by your dealer�
5
GPS ANTENNA CONNECTOR [GPS-ANT] (p. 69)
Connects to the supplied GPS antenna�
NOTE:
Install the GPS antenna where it has a
clear view to receive signals from satellites�
6
MODEM CONNECTOR [AF/MOD] (pp. 69, 79)
Connects to an e-mail modem, NBDP (Narrow
Band Direct Printing) or FAX system through an
RS-232C cable (D-sub 9-pin)�
7
REMOTE CONNECTOR [REMOTE] (pp. 69, 79)
Connects to a PC through an RS-232C cable
(D-sub 9-pin) for remote control�
8
GPS J ACK [GPS-DATA] (pp. 69, 79)
Connects to a GPS receiver to input position and
UTC data for DSC operations� (NMEA0183 ver� 4�10
format)
L
An NMEA ver� 4�10 (sentence formatter: GGA,
GLL, GNS, RMC, VTG) compatible GPS receiver
is required� Ask your dealer about suitable GPS
receivers�
■
Main unit front panel
1
2
3
5
6
7
8
4
Summary of Contents for IC-M803
Page 91: ...83 252 9 29 32 95 4 3 3 4 R8 5 16 Maximum 274 10 25 32 114 4 1 2 Unit mm inch Cut here...
Page 92: ......
Page 95: ...MEMO...