64
13
CONNECTION AND INSTALLATION
2001 NEW
AF/MOD
Pin Pin name
Description
Specification
1
MOD+
Modulation input from an external
Input impedance : 600
Ω
terminal unit.
Input level
: Approximately 0.77 V rms
2
MOD–
Coaxial ground for NMD+.
3
GND
Ground for digital equipment.
4
NAF+
AF detector output for an external
Output impedance : 600
Ω
terminal unit.
Output level
: 0.25–2.5 V rms
5
NAF–
Coaxial ground for NAF+.
6
GND
Ground for digital equipment.
7
NC
No connection.
8
SEND
Transmits when grounded.
Output level
: –0.5 to 0.8 V
Input level
: Less than 20 mA
9
GND
Ground for digital equipment.
1
5
6
9
GPS
Pin Pin name
Description
1
NMEA
+
NMEA0183 ver 3.01 (sentence formatter: GGA) data input
+
.
2
NMEA
_
Ground for NMEA data.
q
w
REMOTE
Pin Pin name
Description
1
DCD
Input terminal for carrier detection.
2
RXD
Input terminal for receive data. (“RS-232C” selection for REMOTE IF. (p. 54))
NMEA-OUT NMEA0183 ver. 3.01 data output. (“NMEA” selection for REMOTE IF. (p. 54))
3
TXD
Outputs transmit data. (“RS-232C” selection for REMOTE IF. (p. 54))
NMEA-IN NMEA0183 ver. 3.01 data input. (“NMEA” selection for REMOTE IF. (p. 54))
4
DTR
Outputs data terminal ready signal.
5
GND
Connected to the ground.
6
DSR
Input terminal for data-set-ready signal.
7
RTS
Outputs request-to-send data.
8
CTS
Input terminal for clear-to-send data.
9
NC
No connection.
1
5
6
9
■
Connector information (continued)
Summary of Contents for IC-M802
