![background image](http://html.mh-extra.com/html/icom/ic-m802/ic-m802_instruction-manual_611284015.webp)
7
2
PANEL DESCRIPTION
2
q
RECEIVE INDICATOR
“
RX
” is displayed when signals are received or the
squelch is open.
w
TUNE INDICATOR
“
TUNE
” blinks while tuning, if an optional external
antenna tuner is connected.
(p. 10)
• “
TUNE
” is displayed after tuning is completed with the
AT-140, AT-130/E and AH-3.
• “
THRU
” is displayed when the Tuner Through function is
activated.
( This function is usable only when using a AT-140 or
AH-3.)
• “
SWR
” is displayed when the antenna SWR worsens
during transmit, depending on the transmit output power.
If it is displayed, check your antenna system.
e
OPERATING MODE INDICATOR
Displays the selected operating mode.
• “
J3E
,” “
USB
,” “
H3E
,” “
AM
,” “
LSB
,” “
J2B
,” “
AFS
,” “
F1B
,”
“
FSK
,” “
A1A
” or “
CW
” is displayed depending on operat-
ing mode and setting.
r
SIMPLEX/DUPLEX INDICATOR
“
SIMP
” is displayed when a simplex channel is se-
lected.
“
DUP
” is displayed when a duplex channel is se-
lected.
t
FUNCTION INDICATOR
“ ” is displayed when a secondary function can be
accessed.
y
IF FILTER WIDTH INDICATOR
Displays the selected IF filter passband width in the
e-mail operation mode.
u
CLARITY INDICATOR
(p. 12)
“
CLAR
” is displayed when the clarity function is ac-
tivated and shows the shifting frequency in “Hz.”
i
SPEAKER OFF INDICATOR
“
S P
” is displayed when the speaker output is
turned OFF.
o
AGC OFF INDICATOR
(p. 11)
“
A G C
” is displayed when the AGC OFF function is
turned ON.
!0
POSITION/UTC TIME INDICATOR
(p. 16)
Displays position and/or UTC (or local) time. When
a GPS receiver is connected to [GPS], the indica-
tion is automatically updated.
• When no GPS receiver is connected, the position and
UTC time must be set manually.
• “
GPS
” is displayed when an NMEA0183 ver. 3.01 data
is applied to [GPS], “
MNL
” appears when the position is
manually set.
• “
UTC
” is displayed when the offset time has not been
programmed. (No “
UTC
” indication when offset time is
programmed and shows local time.)
!1
CHANNEL NUMBER INDICATION
Displays the selected channel number.
!2
S/RF INDICATOR
Displays the relative transmit output power levels
during transmit and the receive signal strength dur-
ing receive.
!3
NOISE BLANKER INDICATOR
(p. 11)
“
NB
” is displayed when the noise blanker function is
ON.
!4
SQUELCH INDICATOR
(p. 11)
“
SQL
” is displayed when the squelch is ON.
!5
TRANSMIT INDICATOR
➥
“
TX
” is displayed during transmit.
➥
“
TX
” blinks while monitoring a transmit frequency.
(p. 10)
!6
CHANNEL NAME/RECEIVE FREQUENCY
READOUT
➥
Displays the programmed channel names.
➥
Displays the receive frequency when no chan-
nel name is programmed, when the frequency
display is selected.
➥
In the DSC watch mode, displays “DSC WATCH.”
!7
TRANSMIT FREQUENCY READOUT
Displays the transmit frequency.
!8
OPERATING GUIDE INDICATION
During DSC watch mode operation, displays sev-
eral types of control guidance, depending on the
selected screen.
!9
SCANNING FREQUENCY READOUT
In the DSC watch mode, displays the programmed
scan frequency.
• Decimal points blink.
2001 NEW
Summary of Contents for IC-M802
