manualshive.com logo in svg

Icom iC-M605, Instruction Manual, Page: 56 / 124

Share
Download
Icom iC-M605 Instruction Manual Download Page 56

46

8

DSC OPERATION

New2001

 

■

Receiving DSC calls (Continued)

1.   When a Distress Cancel call is 

received:

 

• Alarm sounds.

 

•  The following screen is displayed 

and the backlight blinks.

 

•

   “ ” blinks.

 

2.  Push any [Alarm Off] 

.

3.   Select your action.

 

 

D

 Receiving a Distress Cancel call

 

D

 Receiving a Distress acknowledgement

1.   When a Distress acknowledgement 

sent to another ship is received:

 

• Alarm sounds.

 

•  The following screen is displayed 

and the backlight blinks.

 

•

   “ ” blinks.

 

2.   Push any [Alarm Off] 

.

3.   Push any [Close Call RCVD 

Window] 

.

 

 

• Enters the DSC Task mode.

DSC Task mode (pp. 29, 30)

  •  Automatically selects Channel 16, and 

then monitor it, because a coast station 

may require assistance.

 

•

  Rotate [CH/ENT] to view the call 

contents.

4.   Push  [Standby] 

 to return to 

the Main screen.

Summary of Contents for iC-M605





























































































































Reviews:

No comments