![background image](http://html1.mh-extra.com/html/icom/ic-m605/ic-m605_instruction-manual_2037993114.webp)
New2001
104
New2001
TROUBLESHOOTING
14
New2001
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
The transceiver does
not turn ON.
• Bad connection to the power supply.
• Blown fuse.
• Check the connection to the transceiver
and power supply.
• Repair the problem, and then replace
the fuse.
Little or no sound
comes from the
speaker.
• Squelch level is set too high.
• Volume level is set too low.
• The internal speaker is OFF.
• Set the squelch to the threshold point.
• Set the volume to a suitable level.
• Turn ON the internal speaker.
You cannot transmit,
or cannot select high
power.
• Some channels are set for low power or
receive only by regulations.
• The output power is set to low.
• Change channels.
• Push [HI/LO] to select high power.
Scan does not start.
• More than 2 favorite channels are not set. • Set the Favorite channels.
No beep sounds.
• The Key Beep function is OFF.
• Turn ON the Key Beep function.
The Main screen is not
displayed at power ON.
• MMSI (DSC self ID) code is not set.
• Set the MMSI (DSC self ID) code.
Individual or Group ID
cannot be set.
• The entered ID code is incorrect.
First digit must be set to between ʻ1ʼ and
ʻ9ʼ for an Individual ID.
First digit must be set to ʻ0ʼ for a Group ID.
• Enter a correct ID code.
“??” blinks instead of
the position and time.
•
4 hours have passed since you manually
entered the position.
•
The GPS position is invalid.
• Enter the position.
“NO POSITION”
and “NO TIME” are
displayed instead of
the position and time.
• The GPS antenna is not correctly
connected.
• The position and time have not been
manually entered.
• Check the GPS antenna connection.
• Enter the position and time.