manualshive.com logo in svg

Icom iC-M605, Instruction Manual, Page: 106 / 124

Share
Download
Icom iC-M605 Instruction Manual Download Page 106

96

12

CONNECTIONS AND MAINTENANCE

New2001

 

■

Mounting the transceiver

The universal mounting bracket supplied with your 

transceiver enables overhead or flat mounting.

•  Mount the transceiver securely with the 5 supplied (M5 × 20) 

screws to a surface that is more than 10 mm thick and can 

support more than 5 kg.

•  Mount the transceiver so its face is at 90° to your line of 

sight when operating.

CAUTION: 

Keep the transceiver and microphone at least 

1 meter (3.3 feet) away from your vessel’s magnetic 

navigation compass.

NOTE:

•  Check the installation angle. The function display may not 

be easy to read at some angles.

•  When mounting the transceiver on the place that is prone 

to strong vibration, use the supplied sponges between the 

transceiver and mounting bracket to reduce the vibration.

Sponges reduce the vibration effects.

See NOTE shown to the left.

*

Sponge*

Summary of Contents for iC-M605





























































































































Reviews:

No comments