![background image](http://html1.mh-extra.com/html/icom/ic-m605/ic-m605_instruction-manual_2037993002.webp)
ii
Thank you for choosing this Icom product.
This product is designed and built with Icom’s state of the art
technology and craftsmanship.
With proper care, this product should provide you with years
of trouble-free operation.
The IC-M605/IC-M605EURO
vhf
marine
transceiver
has
DSC functions for distress alert transmission and reception,
as well as the general DSC calls (Individual calls, All Ships
calls, Group calls, and so on).
IMPORTANT
READ ALL INSTRUCTIONS
carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL
— This instruction
manual contains important operating instructions for the
IC-M605/IC-M605EURO.
Icom, Icom Inc. and Icom logo are registered trademarks of Icom Incorporated
(Japan) in Japan, the United States, the United Kingdom, Germany, France,
Spain, Russia, Australia, New Zealand, and/or other countries.
AquaQuake is a trademark of Icom Incorporated.
EXPLICIT DEFINITIONS
WORD
DEFINITION
R
WARNING!
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
CLEAN THE FRONT PANEL THOROUGHLY WITH FRESH
WATER
after exposure to saltwater, and dry it before
operating. Otherwise, the front panel’s keys, switches and
controllers may become unusable, due to salt crystallization.
NOTE:
If the front panel’s waterproof protection appears
defective, carefully clean it with a soft, wet (fresh water)
cloth, then, dry it before operating.
The front panel may lose its waterproof protection if the
case or connector cover is cracked or broken, or the
transceiver has been dropped.
Icom is not responsible for the destruction, damage to, or
performance of any Icom or non-Icom equipment, if the
malfunction is because of:
•
Force majeure, including, but not limited to, fires,
earthquakes, storms, floods, lightning, other natural
disasters, disturbances, riots, war, or radioactive
contamination.
• The use of Icom transceivers with any equipment that is
not manufactured or approved by Icom.