![background image](http://html.mh-extra.com/html/icom/ic-m422/ic-m422_instruction-manual_612797054.webp)
48
12
COMMANDMIC II™ HM-157
New2001
■
Setting TAG channels
q
While pushing
[H/L]
, push
[CH/WX•
U/I/C
]
several
times to select the desired channel group (USA, INT or
CAN).
w
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired channel to be set as
a TAG channel.
e
Push
[SCAN•
]
for 1 sec. to set the displayed channel
as a TAG channel.
• “
” appears in the display.
r
To cancel the TAG channel setting, repeat step
e
.
• “
” disappears.
✔
Clearing (or setting) all tagged channels
While pushing
[H/L]
, push
[SCAN•
]
for 3 sec. (until a long
beep changes to 2 short beeps) to clear all TAG channels in
the channel group.
• Repeat above procedure to set all TAG channels.
■
Starting a scan
Set scan type (Priority or Normal scan) and scan resume
timer in advance, using Set mode. (p. 32)
q
While pushing
[H/L]
, push
[CH/WX•
U/I/C
]
several
times to select the desired channel group (USA, INT or
CAN).
w
Set TAG channels as described at left.
e
Make sure the squelch is closed to start a scan.
r
Push
[SCAN•
]
to start
Priority or Normal scan.
• “
”or “
” appears at
the channel comment indicator
during Priority or Normal scan,
respectively.
• When a signal is detected, scan
pauses until the signal disap-
pears or resumes after pausing
5 sec. according to the Set mode setting (Channel 16 is still
monitored during Priority scan).
• Push
[
Y
Y
]
or
[
Z
Z
]
to check the scanning TAG channels, to change
the scanning direction or resume the scan manually.
• “
” blinks at the channel comment indicator and a beep tone
sounds when a signal is received on Channel 16 during Priority
scan.
t
To stop the scan, repeat step
r
.
TAG
DW
TAG
TAG
DW
During normal scan.
!IC-M422.qxd 05.2.23 2:21 PM Page 48 (1,1)