![background image](http://html.mh-extra.com/html/icom/ic-m422/ic-m422_instruction-manual_612797026.webp)
D
Transmitting a Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
q
Push
[DSC•
POS
]
to enter the DSC menu.
w
Push
[
Y
]
or
[
Z
]
to select “
,” push
[DSC•
POS
]
.
e
Push
[
Y
]
or
[
Z
]
to select the desired pre-programmed
Group address, push
[DSC•
POS
]
.
• The ID code must be set in advance. (p. 13)
r
Push
[
Y
]
or
[
Z
]
to select the desired intership channel,
and push
[DSC•
POS
]
.
• Intership channels are already preset into the transceiver in pre-
ferred order.
• After pushing
[DSC•
POS
]
, Channel 70 is selected and “
”
appears at the channel comment indicator.
t
Push
[DSC•
POS
]
to transmit the Group call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
• Routine category only is available.
y
After the Group call has been transmitted, the specified
channel (in step
r
) is selected automatically.
u
Push and hold
[PTT]
to communicate your message to the
responding ship.
Scrolls
Transmitting
Push
20
6
DSC OPERATION
New2001
!IC-M422.qxd 05.2.23 2:20 PM Page 20 (1,1)