![background image](http://html.mh-extra.com/html/icom/ic-m422/ic-m422_instruction-manual_612797014.webp)
8
3
BASIC OPERATION
New2001
■
Call channel programming
Call channel is used to select Channel 9 (default), however,
you can program the call channel with your most often-used
channels in each channel group for quick recall.
q
Push both
[
Y
]
and
[
Z
]
on
the transceiver one or more
times to select the desired
channel group (U.S.A., In-
ternational or Canada) to be
programmed.
w
Push
[16•
9
]
for 1 sec. to se-
lect the call channel of the
selected channel group.
• “
CALL
” and call channel num-
ber appear.
e
Push
[16•
9
]
again for 3 sec.
(until a long beep changes
to 2 short beeps) to enter
the call channel program-
ming condition.
• Channel number starts blink-
ing.
r
Push
[
Y
]
or
[
Z
]
to select
the desired channel.
t
Push
[16•
9
]
to program the
displayed channel as the
call channel.
• Push
[CH/WX
•DUAL
]
to can-
cel.
• The channel number stops
blinking.
!IC-M422.qxd 05.2.23 2:20 PM Page 8 (1,1)