![background image](http://html.mh-extra.com/html/icom/ic-m402/ic-m402_instruction-manual_612788008.webp)
2
2
PANEL DESCRIPTION
q
DISTRESS SWITCH [DISTRESS]
Transmits distress call when pushed for 5 sec. (p. 12)
w
POWER / VOLUME CONTROL [VOL]
Turns power ON and OFF and adjusts the audio level. (p. 6)
e
SQUELCH CONTROL [SQL]
Sets the squelch threshold level. (p. 6)
r
TRANSMIT POWER SWITCH [H/L]
➥
Toggles high and low power when pushed. (p. 6)
• Some channels are set to low power only.
➥
While pushing this switch, other switches perform sec-
ondary functions.
t
CHANNEL SWITCH [CH/WX•DUAL]
➥
Selects and toggles the regular channels and weather
channel when pushed momentarily. (p. 5)
➥
While push and hold [H/L] push [CH/WX•DUAL] to se-
lects one of 3 regular channels in sequence. (p. 5)
• International, U.S.A. and Canadian channels are available for
regular channels.
➥
Starts dualwatch or tri-watch when pushed for 1 sec.
(p. 8)
➥
Stops dualwatch or tri-watch when either is activated.
y
CHANNEL 16/CALL CHANNEL SWITCH [16•9]
➥
Selects Ch 16 when pushed. (p. 5)
➥
Selects call channel when pushed for 1 sec. (p. 5)
• “CALL” appears when call channel is selected.
➥
Push for 3 sec. to enter call channel programming con-
dition when call channel is selected. (p. 7)
➥
While push and hold [H/L] push [16•9] to enter memory
name programming condition. (p. 7)
➥
While turning power ON push [16•9] to enter set mode.
(p. 20)
u
CHANNEL UP / DOWN SWITCHES [
Y
Y
/
Z
Z
•
SCAN]
➥
Push to select the operating channels, set mode con-
tents, etc. (p. 6)
➥
While push and hold [H/L] push [
Y
]/[
Z
] to adjust the
brightness of the LCD and switch backlight.
➥
Push for 3 sec. to enter call channel programming con-
dition when call channel is selected. (p. 7)
➥
Push [
Y
] or [
Z
] for 1sec. to start/stop scanning. (p. 10)
➥
Push [
Y
] and [
Z
] for 1sec. to toggle the tag setting for
the displayed channel. (p. 10)
i
DSC/INTERCOM SWITCH [DSC/IC]
([DSC] for IC-M402S)
➥
Selects the DSC menu when pushed. (p. 11)
➥
While push and hold [H/L] push [DSC] for 1 sec. to show
current position and time. (p. 11)
➥
Push [DSC] for 1 sec. to enter intercom mode.
(IC-M402 only, p. 19)
Speaker
Function display
w
q
u
e
r
t
y
i
IC-M402
■
Panel description
00_IC-M402_S.qxd 02.2.21 0:06 PM Page 2 (1,1)
Summary of Contents for IC-M402
