Icom IC-M402, Instruction Manual

Page: 22 / 50

16
6
DSC OPERATION
■
DSC individual ID
A total of 30 DSC address ID’s can be programmed and
named with up to 10 characters.
ï ï Programming address ID
q
Push [DSC] to select the DSC menu.
w
Push [
Y
]/[
Z
] to select “ADDRESS”
and push [DSC].
e
Push [
Y
]/[
Z
] to select “ADD” and
push [DSC].
r
Set the distress ID and ID name, then
push [DSC].
• Rotate the channel selector to select the
character.
• Push [H/L] to advance the cursor.
• Push [CH/WX] to move the cursor back-
ward.
• Push [16] to cancel and exit the condition.
• Up to 5 characters available to enter ID
names.
t
Push [DSC] to program and to exit
the ID programming mode.
ï ï Deleting address ID
q
Push [DSC] to select the DSC menu.
w
Push [
Y
]/[
Z
] to select “ADDRESS” and push [DSC].
e
Push [
Y
]/[
Z
] to select ‘DEL,’ then
push [DSC].
• When no address ID is programmed, the
transceiver exits the condition automati-
cally.
r
Select the desired ID name pushing
[
Y
]/[
Z
], then push [DSC].
t
Push [DSC] to delete the address ID;
push an other switch to exit the con-
dition.
00_IC-M402_S.qxd 02.2.21 0:07 PM Page 16 (1,1)