manualshive.com logo in svg

Icom IC-M402, Instruction Manual

Share
Download
Icom IC-M402 Instruction Manual Download Page 24

18

6

DSC OPERATION

ï

ï

Receiving an individual call

While monitoring Ch 70 and an individ-
ual call is received:

➥

Emergency alarm or beeps sound de-
pending on the received category.

➥

“RCV Individual” scrolls in the display,
then the channel specified by the calling station is automat-
ically selected for checking the channel condition.

ï

ï

Receiving a geographical area call

While monitoring Ch 70 and a geo-
graphical area call (for the area you are
in) is received:

➥

Emergency alarm or beeps sound de-
pending on the received category.

➥

“RCV Geographic” scrolls, then the channel specified by

the calling station is automatically selected for voice com-
munications.

➥

Monitor the selected channel for an announcement from
the calling ship.

When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all geographical area calls
are received, regardless of your position.

ï

ï

Receiving a position reply call

While monitoring Ch 70 and a position reply call (for the area
you are in) is received:

➥

“Received POS” appears in the display.

• “Latitude and longitude are displayed alternately.

When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all geographical area calls
are received, regardless of your position.

ï

ï

Receiving a position request call

While monitoring Ch 70 and a position
request call (for the area you are in) is
received:

➥

“RCV Pos request” scrolls in the dis-

play.

➥

Push [DSC] to reply to the call.

When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all geographical area calls
are received, regardless of your position.

00_IC-M402_S.qxd  02.2.21 0:08 PM  Page 18 (1,1)

Summary of Contents for IC-M402



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands