Icom IC-M330 Instruction Manual Download Page 2

Page: 2 / 80

New2001

Thank you for choosing this Icom product.

This product is designed and built with Icom’ s state of

the art technology and craftsmanship. With proper care,

this product should provide you with years of trouble-free

operation.

IMPORTANT

READ ALL INSTRUCTIONS

carefully and completely

before using the transceiver.

SAVE THIS INSTRUCTION MANUAL

— This

instruction manual contains important operating instructions

for the IC-M330, IC-M330E, IC-M330G, IC-M330GE.
This instruction manual includes some functions which are

usable only when they are preset by your dealer.

Ask your dealer for details.

EXPLICIT DEFINITIONS

WORD

DEFINITION

WARNING!

Personal injury, fire hazard or electric

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk

of personal injury, fire or electric shock.

Icom is not responsible for the destruction, damage to, or

performance of any Icom or non-Icom equipment, if the

malfunction is because of:

•

Force majeure, including, but not limited to, fires,

earthquakes, storms, floods, lightning, other natural

disasters, disturbances, riots, war, or radioactive

contamination.

• The use of Icom transceivers with any equipment that is

not manufactured or approved by Icom.

FEATURES

Easy user interface

The transceiver is equipped with a screen for easy readability

and easy-to-use user interface.

Dualwatch and Tri-watch functions

Convenient functions that enable you to monitor the Distress

channel (Ch 16) while receiving on another channel of your

choice (Dualwatch), or while receiving on another channel of

your choice, and the Call channel (Tri-watch).

* May not be usable, depending on the transceiver version.

DSC function

The transceiver has the DSC functions for distress alert

transmission and reception, as well as the general DSC calls

such as Individual calls, All ships calls, Group calls, and so on.

Summary of Contents for IC-M330

















































































Search results

Summary of Contents for IC-M330

Reviews:

Related manuals for IC-M330

Brands by name

Popular brands

Icom IC-M330, Instruction Manual

Search results

Summary of Contents for IC-M330

Reviews:

Related manuals for IC-M330

Brands by name

Popular brands