![background image](http://html.mh-extra.com/html/icom/ic-m323/ic-m323_instruction-manual_612763066.webp)
56
7
DSC OPERATION
■
Receiving DSC calls (Continued)
D
Receiving a Position Request Call
When a Position Request Call is received:
The alarm sounds for 2 minutes.
➥
“RCVD POS REQUEST” is displayed. The backlight blinks
➥
for 2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step
w
is displayed.
Push a softkey to select your desired action.
w
[IGN]
Push to ignore the Call and return to the normal operat-
➥
ing mode.
• The transceiver exits the DSC mode.
• “
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 60)
➥
[ACK]
Push to display the “POSITION REPLY” screen and
➥
send a reply to the Call. (p. 45)
When “POSITION ACK” is set to “Auto TX,” the transceiver
automatically replies to the Call. In that case, both the TX
and RX calls are stored in the Transmitted and Received
Call Logs.
Summary of Contents for IC-M323
Page 96: ......