27
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Making DSC calls
■
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL LEVEL. (p. 64)
Making an
D
individual call
The Individual call function allows you to make a DSC call to
only a specific station.
Enter “INDIVIDUAL CALL” in the DSC CALLS menu.
q
Select a desired preset individual address, or “Manual In-
w
put,” using Dial or [
Y
]/[
Z
], then push Dial or [ENT].
• The ID code for the Individual call can be entered first. (p. 19)
• When “Manual Input” is selected, enter a desired 9 digit MMSI ID
code for the individual you wish to call.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
About Manual Entry:
Enter a desired individual ID in the following way:
• Select a desired number using Dial, or [
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• The first digit is specified as ‘0’ for a Group ID. If a 9 digit Group ID
is entered, an error beep sounds when pushing [ENT] or dial.
• The first two digits are ‘0’ for any coast station ID.
NOTE:
When a coast station is selected in this step, the
voice channel is automatically specified by the coast sta-
tion. Therefore, skip step
e
and go directly to step
r
.
Select a desired intership channel using Dial or [
e
Y
]/[
Z
],
then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
+
Continued on the next page.
MENU
➪
DSC Calls
➪
Individual Call
(Push [MENU].) (Rotate Dial, then push [ENT].)
Summary of Contents for IC-M323
Page 96: ......
