![background image](http://html.mh-extra.com/html/icom/ic-m323/ic-m323_instruction-manual_612763042.webp)
32
7
DSC OPERATION
■
Making DSC calls (Continued)
Making a
D
Group call
The Group call function allows you to make a DSC signal to
only a specific group.
Enter “GROUP CALL” in the DSC CALLS menu.
q
Select a desired preset group address or “Manual Input,”
w
using Dial or [
Y
]/[
Z
], then push Dial or [ENT].
• The ID code for the Group call can be entered first. (p. 20)
• When “Manual Input” is selected, enter the 8 digit ID code for the
group you wish to call.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
Select a desired intership channel using Dial or [
e
Y
]/[
Z
],
then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
About Manual Entry:
Enter a desired group ID in the following way:
• Select a desired number using Dial, or [
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• The first digit is specified as ‘0,’ and the second digit is other than
‘0’ for a Group ID.
• The first two digits are ‘0’ for any Coast station ID.
MENU
➪
DSC Calls
➪
Group Call
(Push [MENU].) (Rotate Dial, then push [ENT].)
Summary of Contents for IC-M323
Page 96: ......