![background image](http://html.mh-extra.com/html/icom/ic-iv85/ic-iv85_instruction-manual_612723017.webp)
4
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
q
CONTROL DIAL [VOL]
(p. 19)
Rotate to adjust the volume level.
The assigned function for
[VOL]
and
[
Y
Y
]
/
[
Z
Z
]
can be ex-
changed in
INITIAL SET MODE
(pgs. 18, 53).
w
PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
e
SQUELCH/MONITOR SWITCH [MONI]
(p. 19)
➥
Push and hold to open the squelch temporarily and
monitor the operating frequency.
➥
While pushing and holding this key, push
[
Y
Y
]
or
[
Z
Z
]
to
adjust the squelch level.
The assigned function for
[VOL]
and
[
Y
Y
]
/
[
Z
Z
]
can be
exchanged in
INITIAL SET MODE
(pgs. 18, 53).
r
UP/DOWN KEYS [
Y
Y
]/[
Z
Z
]
(p.18)
Selects the operating frequency, set mode items, etc.
The assigned function for
[VOL]
and
[
Y
Y
]
/
[
Z
Z
]
can be ex-
changed in
INITIAL SET MODE
(pgs. 18, 53).
t
KEYPAD
(pgs. 5, 6)
Used to enter operating frequency, the DTMF codes, etc.
y
EXTERNAL DC JACK [DC 11V]
➥
Connect an external DC power supply through the op-
tional CP-19R for external DC operation. (p. 16)
➥
Connect the supplied (or optional) wall charger, BC-
167A/D, to charge the attached battery pack. (p. 13)
u
POWER KEY [PWR]
(p. 17)
Push and hold for 1 sec. to turn the power ON and OFF.
i
FUNCTION DISPLAY
(pgs. 7, 8)
o
EXTERNAL SPEAKER/MICROPHONE JACKS [SP/MIC]
Connect an optional speaker-microphone or headset, if de-
sired. The internal microphone and speaker will not func-
tion when a connector is inserted.
See page iv for a list of available options.
!0
ANTENNA CONNECTOR
(p. 1)
Connects the supplied antenna.