![background image](http://html.mh-extra.com/html/icom/ic-iv85/ic-iv85_instruction-manual_612723056.webp)
43
PAGER/CODE SQUELCH
10
■
Pager function
This function uses DTMF codes for paging and can be used
as a “message pager” to con
fi
rm you of a caller’s identi
fi
cation
even when you leave the transceiver temporarily unattended.
■
Code programming
D
D
Before programming
The pager and code squelch functions require ID codes and a
group code. These codes are 3-digit DTMF codes and must
be written into the code channels before operation.
q
Decide the ID code of each transceiver and a group code
for your group.
w
Decide whether you want to return to normal operation or
code squelch operation after a connection is made.
e
Program the ID code, group code and transmit codes
(other station’s codes) as below.
D
D
Code channel assignment
*Channel CP automatically memorizes an ID code when receiving a
pager call. The contents in channel CP cannot be changed manually.
Pager selective code (push [PTT])
Beep B
eep
Beep
Answer back (manual)
Bee
p B
eep
Bee
p
Set both transceivers to either
code squelch or non-coded operation
Communication
ID OR
CODE CHANNEL
“RECEIVE ACCEPT” OR
GROUP CODE
NUMBER
“RECEIVE INHIBIT”
Your ID code
Other parties’
ID code
Group code
Memory space*
0
1–6
One of 1–6
P
“Receive accept” only
“Receive inhibit” should be
programmed in each channel.
“Receive accept” must be
programmed in one channel.
“Receive inhibit” only.
Requires Optional UT-108
Optional UT-108 is required when using the pager/code squelch functions.