![background image](http://html.mh-extra.com/html/icom/ic-gm651/ic-gm651_instruction-manual_612701003.webp)
R
WARNING! NEVER
connect the transcever to an
AC outlet. Ths may pose a fire hazard or result n an electrc
shock.
NEVER
connect the transcever to an external DC power
supply drectly. The transcever should be connected to the
DC power supply through the PS-250 (nput voltage: 10.8
to 31.2 V DC) that s sold by the set wth ths transcever. Be
sure to not connect wth reverse polarty.
NEVER
cut the DC power cable between the DC plug and
fuse holder. If an ncorrect connecton s made after cuttng,
the transcever may be damaged.
NEVER
place the transcever where normal operaton of
the vessel may be hndered or where t could cause bodly
njury.
KEEP
the transcever at least 1 m away from the shp’s
navgaton compass.
DO NOT
use or place the transcever n areas wth tem-
peratures below –15°C or above +55°C or, n areas subject
to drect sunlght, such as the dashboard.
DO NOT
use the chemcal agents such as benzne or al-
cohol when cleanng, as they may damage the transcever
surfaces. If the transcever becomes dusty or drty, wpe t
clean wth a soft, dry cloth.
BE CAREFUL!
The transcever rear panel wll become
hot when operatng contnuously for long perods.
Place the transcever n a secure place to avod nadvertent
use by chldren.
BE CAREFUL!
The transcever employs waterproof con-
structon, whch correspond to IPX7 of the nternatonal stan-
dard IEC 60529 (2001). However, once the transcever have
been dropped, waterproofng cannot be guaranteed due to
the fact that the case may be cracked, or the waterproof seal
damaged, etc.
Icom optonal equpment s desgned for optmal perfor-
mance when used wth ths transcever. We are not respon-
sble for the transcever beng damaged or any accdent
caused when usng non-Icom optonal equpment.
PRECAUTIONS
Summary of Contents for IC-GM651
Page 1: ...INSTRUCTION MANUAL New2001 iGM651 VHF MARINE TRANSCEIVER Ver 1 003 ...
Page 130: ...MEMO New2001 ...
Page 131: ...MEMO New2001 ...