manualshive.com logo in svg

Icom IC-GM651, Instruction Manual

Share
Download
Icom IC-GM651 Instruction Manual Download Page 28

20

6

DSC OPERATION

New2001

r

  Input the 9-dgt ndvdual ID drectly wth the keypad.

  • Rotate 

[SELECTOR]

 to move the cursor backward or forward.

  • Push 

[CE]

 to clear the ID and name.

  • Push 

[CLR]

 to cancel and back to the prevous screen.

--DSC Menu--

Add:Individual ID
Input 9 Digits

_________

Input Name

__________

Rotate

SELECTOR

Push

CLR

1st digit blinks

--DSC Menu--

Add:Individual ID
Input 9 Digits

123______

Input Name

__________

Input the individual ID

Cursor moves

--DSC Menu--

Add:Individual ID
Input 9 Digits

12312312_

Input Name

__________

t

  Input the 10-character of the ndvdual ID name drectly 

wth the keypad.

  • Rotate 

[SELECTOR]

 to move the cursor backward or forward.

  • Push 

[CE]

 to clear the ID and name.

  • Push 

[CLR]

 to cancel and back to the prevous screen.

--DSC Menu--

Add:Individual ID
Input 9 Digits

123123123

Input Name

__________

Rotate

SELECTOR

Push

1st character blinks

--DSC Menu--

Add:Individual ID
Input 9 Digits

123123123

Input Name

Sta_______

Input the individual ID name

Cursor moves

CLR

--DSC Menu--

Add:Individual ID
Input 9 Digits

123123123

Input Name

Station_1_

� 

To enter the space:

Push         several times 

until ‘

_

’ (under bar) appears.

Summary of Contents for IC-GM651





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands