Icom IC-GM651 Instruction Manual Download

Page: 11 / 132

PANEL DESCRIPTION

New2001

POWER KEY [POWER]

(p. 8)

➥

Push to turn power ON and OFF.

• The transcever does not turn power ON when the connected

PC-250

power

supply

s turned OFF.

• After turnng power ON, the 9-dgt MMSI code appears for 2

sec., f programmed.

• When no MMSI code s programmed, “

NO MMSI

” s ds-

played at power ON, and then the MMSI code programmng
s requred.

➥

Whle pushng and holdng

[H/L]

, turn power ON to ac-

tvate the AquaQuake functon. (p. 13)

➥

Whle pushng and holdng

[

⁄6

•C]

, turn power ON to

enter Set mode. (p. 106)

DIAL KEY [DIAL]

➥

Push to select to the regular channel. (pgs. 7, 8)

➥

Whle pushng and holdng

[H/L]

, push to select one of

three channel groups n sequence dependng on ver-
son. (p. 8)

• EUR verson has Internatonal channels only and ths func-

ton s not avalable.

SQUELCH CONTROL [SQL]

(p. 8)

Rotate to set the squelch threshold level.

MIC CONNECTOR

Connect the optonal hand mcrophone only. (p. 116)

CAUTION: NEVER

connect the optonal handset

(HS-98) here.

VOLUME CONTROL [VOL]

(p. 8)

Rotate to adjust the audo level.

TRANSMIT POWER KEY [H/L]

➥

Push to toggle the output power hgh or low. (p. 8)

• Some channels are set to low power only.

➥

Whle pushng and holdng ths key, some keys perform

secondary functons.

SELECTOR DIAL [SELECTOR]

(pgs. 7, 8, 106)

Rotate to select the operatng channels, set mode con-

tents, etc.

CHANNEL 16/CALL CHANNEL KEY [

⁄6

•C]

➥

Push to select Channel 16. (p. 7)

➥

Push and hold for 1 sec. to select call channel. (p. 7)

• “

CALL

” appears when call channel s selected.

➥

Push and hold for 3 sec. to enter call channel program-

mng condton when call channel s selected. (p. 10)

KEYPAD

➥

Inputs numeral for channel number nput, etc.

• After nputtng the desred channel number, push

[ENT]

• Push and hold

[0•

]

to nput ‘A’ for smplex channels.

➥

Inputs numeral, alphabet and some symbols for chan-

nel comment nput.

➥

After pushng

[

]

, push to perform the secondary functon.

• Most of secondary functon (except TAG channel settng;

p. 16, prnt out operaton; p. 12) can be cleared or cancelled
when

[CLR]

s pushed.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Summary of Contents for IC-GM651





































































































































Search results

Summary of Contents for IC-GM651

Reviews:

Related manuals for IC-GM651

Brands by name

Popular brands

Icom IC-GM651, Instruction Manual

Search results

Summary of Contents for IC-GM651

Reviews:

Related manuals for IC-GM651

Brands by name

Popular brands