![background image](http://html.mh-extra.com/html/icom/ic-f9011b/ic-f9011b_operating-manual_612680007.webp)
4
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Analog mode operation
RE-DIAL KEY
“DTMR”
Push to transmit the last-transmitted DTMF code.
DTMF AUTODIAL KEY
“DTMA” (p. 12)
❍
For Simple and 10-key types
➥
Push to enter the DTMF channel selection mode, then
select a desired channel using
[CH Up]/[CH Down] or
[CH Up/Down].
➥
After selecting the channel, push to transmit the DTMF code.
❍
For Non-display types
➥
Push to transmit the DTMF code programmed in DTMF
channel 1.
COMPANDER KEY
“COMP”
❍
For Simple and 10-key types
Push to turn the Compander function ON or OFF.
This function reduces noise components from the transmitted
audio to provide clear communication.
❍
For Non-display types
➥
Hold down for 1 second to turn the Compander function ON.
➥
If the function is ON, push to turn it OFF.
SCRAMBLER KEY
“SCR” (p. 12)
❍
For Simple and 10-key types
Push to turn the Voice Scrambler function ON or OFF.
❍
For Non-display types
➥
Hold down for 1 second to turn the Voice Scrambler func-
tion ON.
➥
If the function is ON, push to turn it OFF.
CALL KEYS
*
1
“CALL” “CALA” “CALB” (p. 11)
Push to transmit a 2-tone code.
• Call transmission is necessary before you call another station, de-
pending on your signaling system.
•
[Call A] and/or [Call B] may be available when your system em-
ploys selective ‘Individual/Group’ calls.
TX CODE CHANNEL SELECT KEY
*
1,
*
2
“TXC” (p. 11)
Push to enter the ID code channel selection mode, and then
select a desired channel using
[CH Up]/[CH Down] or [CH
Up/Down].
TX CODE CHANNEL UP/DOWN KEYS
*
1,
*
2
“TXCU” “TXCD”
(p. 11)
Push to select a TX code channel directly.
C.TONE CH ENT KEY
*
1,
*
2
“T SEL”
Push to enter the continuous tone channel selection mode,
and then select a desired tone frequency/code setting using
[CH Up]/[CH Down] or [CH Up/Down]. The selected chan-
nel remains set as the continuous tone channel until another
channel is designated as such.
*
1
These functions are programmable for only transceivers whose re-
vision number is 1.7 or later.
*
2
Not available on Non-display types.